(585) 546-6200

There are over 4,000 injection molding materials used in the market today. Nordon, Inc. typically works with about 700 different materials.  To see the comparative properties of some, click on the links below.

POM Acetal
ABS Acrylonitrile Butadiene Styrene
CP Cellulose Acetate Propionate
CPVC Chlorinated Polyvinyl Chloride
EVA Ethylene Vinyl Acetate
HDPE High Density Polyethylene
HIPS High Impact Polystyrene
HMWHDPE High Molecular Weight HDPE
In Ionomers (Surlyn)
LCP Liquid Crystal Polymer
LDPE Low Density Polyethylene
LLDPE Low Linear Density Polyethylene
PPE Phenylene Ether Copolymer
PA6 Polyamide (Nylon) 6
PA11 Polyamide (Nylon) 11
PA66 Polyamide (Nylon) 66
PA12G Polyamide 12, 30% glass filled
PA66M Polyamide 66, 40% mineral filled
PAEK Polyaryletherketone
PAS Polyarylsulfone
PB Polybutylene
PBT Polybutylene Terephtalate
PC Polycarbonate
PC/ABS Polycarbonate/ABS Alloy
PET Polyethylene Terephtalate
PETG Polyethylene Terephtalate Glycol
PEI Polyetherimide
PEEK Polyetheretherketone
PEKEKK Polyetherketoneetherketoneketone
PES Polyethersulfone
TPI Polyimide
MBS Polymethacrylate Butadiene Styrene
PMMA Polymethylmethacrylate (Acrylic)
PPS Polyphenylene Sulfide
PPA Polyphtalamide
PP Polypropylene Homopolymer
PP/Co Polypropylene Copolymer
PP/Talc Polypropylene 40% Talc Filled
PP/Glass f Polypropylene 30% Glass Filled
XPS Polystyrene Crystal
PSO Polysulfone
PUR Polyurethane Plastic Rigid
PVDC Polyvinylidene Chloride
PVDF Polyvinyldene Fluoride
RPVC Rigid Polyvinyl Chloride
SAN Styrene Acrylonitrile Copolymer
TP Thermoplastic Elastomer Polyester
TPO Thermoplastic Elastomer Polyolefin
TPU Thermoplastic Polyurethan